Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 5le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
Unscrew flash PCB
-
Remove one 3.3mm #00 screw.
-
Remove one 3.9 #00 screw.
-
De-solder the red wire.
-
Peel off the black tape. Leave it attached to the wires.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.