This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
Align the back cover with its original position on the frame.
Press down on the perimeter of the adhesive to bond the adhesive to the back cover.
To ensure a good seal, apply constant pressure to the back cover with a flat, heavy object. A hefty book works well.
If a substantial gap remains, try squeezing the gap with your fingers but don't force it. Pry the back cover off and check for any surface irregularities, such as unseated connectors or loose and jutting screws.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.
Riga successiva
Riga precedente
Inserisci una nuova riga sotto
Inserisci una nuova riga sopra
Crea rientro riga corrente
Riduci rientro riga corrente
Elimina riga corrente
Vai al passo successivo.
Vai al passo precedente.
Apri aiuto
