Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
The LCD connector is taped into its socket. Use tweezers to carefully lift the clear tape holding the connector down. Once you peel the tape past the gold portion of the connector, the connector should pull out easily.
  • The LCD connector is taped into its socket.

  • Use tweezers to carefully lift the clear tape holding the connector down.

  • Once you peel the tape past the gold portion of the connector, the connector should pull out easily.

  • If you purchased a replacement LCD with the metal brackets pre-attached, then you are finished. If not, continue reading!

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.