MacBook Pro 13" Touch Bar 2018 Logic board Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Traduzione in corso passo 19

Inglese

Olandese

Passo 19

Unplug Left speaker cables

Carefully peel back the black tape to reveal the ZIF connector.
Unlatch the ZIF connector by flicking the arm on the connector upwards and carefully remove the cable from the connector by sliding it out.
Repeat this process with the newly revealed connector.
The two screws that are outlined in yellow are not relevant to this step and are marked on the board itself. For this step, yellow corresponds to the yellow rectangle in the image.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.