Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery. Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.
  • To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery.

  • Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.

  • Do not lift upward on the connector as you disconnect it or you risk damage to the connector socket.

作業中に電源がオンにならないようにするには、バッテリーを外すことをお勧めします。

バッテリーコネクターに取り付けられた透明なプラスチック製のプルタブを掴み、Airの前端に向かって引っ張り、バッテリーをロジックボードから外します。

コネクターの接続を外すときは、コネクターソケットにダメージを与えてしまう可能性があるためコネクターを上に持ち上げないでください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.