Aggiusta le tue cose Community Store

iPad 7 Vervanging van de batterij

Torna alla Guida
Inglese
Olandese
Passo precedente Passo successivo

Traduzione in corso passo 11

Passo 11
iPad 7 Battery Replacement, Cut the adhesive on the right edge: passo 0, immagine 1 di 2 iPad 7 Battery Replacement, Cut the adhesive on the right edge: passo 0, immagine 2 di 2
Cut the adhesive on the right edge

  • Insert a plastic card at the bottom right corner of the battery.

  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.

  • If at any point in this process the adhesive becomes very difficult to cut through, apply an iOpener to that area.

Snijd de lijm aan de rechterzijde door

Steek een plastic kaart onder de rechter benedenhoek van de batterij.

Wees voorzichtig en voorkom dat je je batterij met je tool verbuigt of doorboort. Een verbogen of doorboorde batterij kan gevaarlijke chemicaliën lekken of een brand of explosie veroorzaken.

Als de lijm ergens in het proces te hard is om door te kunnen snijden, kun je ervoor kiezen een iOpener op de plek te gebruiken om de lijm te verzwakken.

[title] Cut the adhesive on the right edge
-[* black] Insert a plastic card at the bottom right corner of the battery.
+[* black] Insert a [product|IF145-101|plastic card] at the bottom right corner of the battery.
[* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.
[* icon_note] If at any point in this process the adhesive becomes very difficult to cut through, apply an iOpener to that area.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.