Aggiusta le tue cose Community Store

MacBook Pro 14" 2021 Vervanging van de onderste behuizing

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Olandese
Passo precedente

Traduzione in corso passo 6

Passo 6
MacBook Pro 14" 2021 Lower Case Replacement, Remove the lower case: passo 0, immagine 1 di 3 MacBook Pro 14" 2021 Lower Case Replacement, Remove the lower case: passo 0, immagine 2 di 3 MacBook Pro 14" 2021 Lower Case Replacement, Remove the lower case: passo 0, immagine 3 di 3
Remove the lower case

  • Remove the lower case.

  • To reinstall the lower case:

  • Lay it down and align the sliding clips with the back edge of the MacBook. Press down on the lower case and slide it toward the back edge to engage the clips.

  • When one side is engaged, it may push the other out of alignment. Check both sides as you push.

  • Once the back corners of the lower case are secured and flush with the frame, press down along the middle of the lower case to engage the four remaining clips.

  • You'll hear and feel each clip snap into place.

Verwijder de onderste behuizing

Verwijder de onderste behuizing.

Om de onderste behuizing weer terug te plaatsen:

Breng je deze op de juiste positie aan en zorg je dat de klemmen nabij de scharnieren op een lijn zitten met de klemmen in het frame. Druk de behuizing vervolgens omlaag en schuif deze richting de scharnieren. Als het goed is, stopt het schuiven zodra de klemmen vastklikken.

Als de klemmen weer vastgeklikt zijn en de onderste behuizing lijkt goed te zitten, druk je de behuizing nog een goed stevig omlaag om de rest van de klemmen te bevestigen. Als het goed is hoor en voel je ze vastklikken.

[title] Remove the lower case
[* black] Remove the lower case.
[* icon_reminder] To reinstall the lower case:
- [* red] Set it in place and align the sliding clips near the display hinge. Press down and slide the cover toward the hinge. It should stop sliding as the clips engage.
- [* orange] When the sliding clips are fully engaged and the lower case looks correctly aligned, press down firmly on the lower case to engage the four hidden clips underneath. You should feel and hear them snap into place.
+ [* red] Lay it down and align the sliding clips with the back edge of the MacBook. Press down on the lower case and slide it toward the back edge to engage the clips.
+ [* icon_note] When one side is engaged, it may push the other out of alignment. Check both sides as you push.
+ [* orange] Once the back corners of the lower case are secured and flush with the frame, press down along the middle of the lower case to engage the four remaining clips.
+ [* icon_note] You'll hear and feel each clip snap into place.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.