Salta al contenuto principale

Sostituzione sensore Home/Touch ID iPhone SE 2022

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
iPhone SE 2022 Home/Touch ID Sensor Replacement, Remove the home/Touch ID sensor assembly: passo 0, immagine 1 di 3 iPhone SE 2022 Home/Touch ID Sensor Replacement, Remove the home/Touch ID sensor assembly: passo 0, immagine 2 di 3 iPhone SE 2022 Home/Touch ID Sensor Replacement, Remove the home/Touch ID sensor assembly: passo 0, immagine 3 di 3
Remove the home/Touch ID sensor assembly
  • Use a pair of tweezers to remove the home/Touch ID sensor assembly by lifting it through the front side of the display.

  • To reinstall, first feed the cable through the hole in the front of the display as shown.

  • Your replacement part may come with extra Y000 screws already installed near the Home Button. Remove the unnecessary screws so that you can reinstall the home button bracket.

Usa un paio di pinzette per rimuovere il sensore Home/Touch ID sollevandolo attraverso il lato anteriore dello schermo.

Per installarlo, prima fai passare il cavo attraverso il foro nella parte frontale del display come mostrato.

La tua parte di ricambio potrebbe arrivare con viti Y000 extra già installate vicino al tasto Home. Rimuovi le viti non necessarie così da poter reinstallare la staffa del tasto Home.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.