Salta al contenuto principale

Sostituzione sensore Home/Touch ID iPhone SE 2022

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
iPhone SE 2022 Home/Touch ID Sensor Replacement, Heat the home/Touch ID sensor cable adhesive: passo 0, immagine 1 di 1
Heat the home/Touch ID sensor cable adhesive
  • Prepare an iOpener and apply it to the screen where the home/Touch ID button is located for at least two minutes to loosen the adhesive underneath its cable.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the display and internal battery are both susceptible to heat damage.

Prepara un iOpener e appoggialo allo schermo dove si trova il tasto Home/Touch ID per almeno due minuti per ammorbidire l'adesivo sotto al suo cavo.

Puoi usare anche un asciugacapelli, una pistola termica o una piastra calda, ma fai attenzione a non surriscaldare il telefono: lo schermo e la batteria interna sono entrambi suscettibili ai danni da calore.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.