Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 2le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
Unfasten the home/Touch ID sensor bracket screws
-
Remove the four screws securing the home/Touch ID sensor bracket:
-
Three 1.2 mm-long Y000 screws
-
One 1.1 mm-long Y000 screw
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.