Salta al contenuto principale

Screen Removal

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Screen Removal, Insert an opening pick: passo 0, immagine 1 di 3 Screen Removal, Insert an opening pick: passo 0, immagine 2 di 3 Screen Removal, Insert an opening pick: passo 0, immagine 3 di 3
Insert an opening pick
  • Once the screen is warm to touch, apply a suction handle to the bottom edge of the screen and as close to the edge as possible.

  • Lift the screen with the suction handle to create a small gap between the screen and the frame.

  • Insert an opening pick into the gap between the frame and the screen.

  • Don't insert the pick more than 1.5 mm to avoid damaging the circuit board.

  • Leave the opening pick in place to prevent the adhesive from resealing.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.