Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 7le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Use a Phillips #1 screwdriver to remove the five 5 mm screws that secure the base panel.
-
Wedge a spudger between the base panel and chassis, and pry around the entire perimeter until you hear a pop and the base panel releases.
-
Lift the base panel up and off of the chassis.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.