Aggiusta la tua roba

Diritto alla Riparazione

Store

Torna alla Guida
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Rotate the assembly so that the green circuit board is facing you as shown in the first picture. Flip board over so it is oriented as shown in the second picture.

  • Rotate the assembly so that the green circuit board is facing you as shown in the first picture.

  • Flip board over so it is oriented as shown in the second picture.

  • Using a Phillips #1 Screwdriver, turn the small knob very slightly counter-clockwise—a few degrees to, at most, one-quarter turn.

  • You can find instructions for testing to make sure your repair worked at this link.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.