Salta al contenuto principale

PSP 300x外壳更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 2

Passo 2
PSP 300x Front Casing Replacement: passo 0, immagine 1 di 2 PSP 300x Front Casing Replacement: passo 0, immagine 2 di 2
  • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

  • Two are located behind the battery's warranty sticker.

  • Two are located on the right side of the PSP.

用菲利普斯#00号螺丝刀拧下PSP背面的所有四个螺丝。

两个位于电池保修贴纸后面。

两个位于PSP的右侧。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.