Traduzione in corso passo 7
-
You must remove the AC Board to inspect the Power Supply board underneath it. It is held in place by 5 screws.
-
Three screws are on the outside of the case. One is to the left of the power cord. The other two are on either side of the switched AC outlets.
-
The final two screws are on the corners of the AC Board.
-
After you remove the screws, detach the four external cables. Release the latch on the three large connectors, by pinching the top of the connector, then pull straight up. From left to right the connectors are:
-
the connector with orange and white wires
-
the connector with the black and white wires coming from the power cord
-
the small connector
-
the connector with the black and white wires taking AC power to the PS Board.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.