Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove the 2mm screws on the copper heat sink on the left side of the device. Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink. Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.
  • Remove the 2mm screws on the copper heat sink on the left side of the device.

  • Use a flathead screwdriver to remove the heat sink. Make sure to remove the adhesive tape from the top of the heat sink.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.