Aggiusta le tue cose Community Store

Öffnungsvorgang und Akku abtrennen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo successivo

Traduzione in corso passo 1

Passo 1
Opening Procedure and Battery Disconnect, Tape the screen: passo 0, immagine 1 di 3 Opening Procedure and Battery Disconnect, Tape the screen: passo 0, immagine 2 di 3 Opening Procedure and Battery Disconnect, Tape the screen: passo 0, immagine 3 di 3
Tape the screen

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the Surface’s display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

Display überkleben

Trage während der Reparatur eine Schutzbrille und beschädige das LCD nicht.

Wenn das Displayglas zerbrochen ist, dann überklebe das Glas mit Klebeband, damit die Scherben zusammenbleiben, und du dich nicht verletzt.

Überklebe das Display komplett mit überlappenden durchsichtigen Klebestreifen.

Dadurch bleiben die Scherben zusammen, auch wenn du am Display hebelst und es hochhebst.

Befolge die Anleitung so genau wie möglich. Wenn das Glas zerbrochen ist, kann es natürlich trotzdem vorkommen, dass es während der Reparatur weiter splittert. Dann musst du die Splitter mit einem Metallwerkzeuge behutsam herausholen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.