Aggiusta le tue cose Community Store

Xbox One Elite Wireless Controller Series 2 Disassembly

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Passo precedente Passo successivo

Traduzione in corso passo 8

Torna alla Guida
Inglese
Cinese
Passo 8
Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: passo 0, immagine 1 di 3 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: passo 0, immagine 2 di 3 Xbox One Elite Wireless Controller Series 2 Disassembly, Removing the Bumper Bar: passo 0, immagine 3 di 3
Removing the Bumper Bar

  • There are two tabs holding the retainer for the bar in place. Gently pop these toward you with a spudger and they'll slide up from their own tension. Note: the retainer will likely stay attached to the bumper assembly, but must be removed from the main controller assembly before proceeding to the next step.

  • Once the retainer has been released, again use the spudger to gently pry the buttons outward and upward (in the direction of the arrow in the image) which will release them from another clip. Do this on both sides.

  • As user Shane Muir has pointed out, please be careful due to the fragility of the retainer in this step. It can easily be broken.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.