Traduzione in corso passo 3
Passo 3
Removing the back
-
Remove this last screw holding the back plate on the port side.
-
On the other side peel the top corner of the back plate to see the last screw you need to unfasten.
-
There are 5 screws in total holding the back to the camera: 2 screws next to the ports, 1 screw behind the port cover (left), and 2 on the other side, 1 of which also holds the bottom plate.
-
Gently remove the ribbon connecting the back to the main board.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.