Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Unscrew the seven 6 mm Phillips #00 screws holding the grey side piece to the black front panel. Five of the Phillips #00 screws are on the LCD board. The other two are on the dock's bottom circuit board. Unscrew the two 8 mm Phillips #1 screws that go through the grey piece and the LCD motherboard.
  • Unscrew the seven 6 mm Phillips #00 screws holding the grey side piece to the black front panel.

  • Five of the Phillips #00 screws are on the LCD board. The other two are on the dock's bottom circuit board.

  • Unscrew the two 8 mm Phillips #1 screws that go through the grey piece and the LCD motherboard.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.