Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 9

Passo 9
When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board. Tilt the logic board slightly forward. Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.
  • When removing and installing the logic board, take care not to damage the delicate microphone ribbon cable at the bottom left of the board.

  • Tilt the logic board slightly forward.

  • Lift the logic board straight up and out of the iMac. Be careful not to snag it on any of the screw posts attached to the inside of the rear case.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.