Salta al contenuto principale

Trackpad MacBook Pro 13" due porte Thunderbolt Fine 2020

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
MacBook Pro 13" Two Thunderbolt Ports Late 2020 Trackpad Replacement: passo 0, immagine 1 di 3 MacBook Pro 13" Two Thunderbolt Ports Late 2020 Trackpad Replacement: passo 0, immagine 2 di 3 MacBook Pro 13" Two Thunderbolt Ports Late 2020 Trackpad Replacement: passo 0, immagine 3 di 3
  • Remove the trackpad assembly.

  • You'll need to swing the display open slightly to remove the trackpad.

  • Take care to feed the trackpad ribbon cable through the MacBook Pro's frame without snagging.

  • Be sure not to lose the six small washers (two circular and four rectangular) resting on the underside of the trackpad.

  • Make sure your new trackpad has a ribbon cable installed before reassembly. If necessary, transfer the old cable, or install the one your new trackpad came with.

Rimuovi il gruppo del trackpad.

Dovrai aprire leggermente lo schermo per rimuovere il trackpad.

Assicurati di far passare il cavo a nastro del trackpad attraverso la cornice del MacBook Pro senza farlo impigliare.

Assicurati di non perdere le sei piccole rondelle (due circolari e quattro rettangolari) che rimangono sul lato inferiore del trackpad.

[* black] Remove the trackpad assembly.
[* icon_note] You'll need to swing the display open slightly to remove the trackpad.
[* icon_caution] Take care to feed the trackpad ribbon cable through the MacBook Pro's frame without snagging.
[* red] Be sure not to lose the six small washers (two circular and four rectangular) resting on the underside of the trackpad.
+[* icon_reminder] Make sure your new trackpad has a ribbon cable installed before reassembly. If necessary, transfer the old cable, or install the one your new trackpad came with.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.