Salta al contenuto principale
Inglese
Francese

Traduzione in corso passo 5

Passo 5
There are three additional 3mm Philips #00 screws underneath the circuit board that need to be removed.
  • There are three additional 3mm Philips #00 screws underneath the circuit board that need to be removed.

  • Now, remove the battery and circuit board with the LCD attached and turn it over so the screen is facing upwards.

Trois autres vis Philips n ° 00 de 3 mm sous la carte de circuit imprimé doivent être retirées.

Maintenant, retirez la batterie et la carte de circuit imprimé avec l'écran LCD attaché et retournez-le pour que l'écran soit orienté vers le haut.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.