Salta al contenuto principale

iMac M1 24インチの分解

Inglese
Giapponese

Traduzione in corso passo 17

Passo 17
iMac M1 24" Teardown: passo 0, immagine 1 di 3 iMac M1 24" Teardown: passo 0, immagine 2 di 3 iMac M1 24" Teardown: passo 0, immagine 3 di 3
  • The new power supply (plus integrated ethernet jack) may live on the outside now, but it won’t escape our tools! We had to bust out the heavy duty stuff but it’s worth it.

  • Repairability benefits: If the iMac's power supply dies, you can easily replace it. Plus, the lack of large exposed capacitors inside the iMac itself (like we've seen in previous generations) means you'll have a safer time poking around in there.

  • On the other hand, no more capacitor swaps—you’re not getting inside this thing without destroying it.

  • The innards look similar to a standard Apple MacBook power supply, albeit with a network cable passing through.

  • The tiny ethernet board is likely strengthening and piping the internets through the black wire bunch.

  • Red wires feed power into the not-Magsafe magnetic umbilical cord.

  • The power supply can pump out a healthy 143 watts, but in our testing, the iMac only draws about 60 watts at most. That's a lot of extra headroom for power-hungry USB-C peripherals.

新しい電源供給(と統合されたイーサネットジャック)は、外側に付けられていますが、私たちのツールからは逃れられません!頑丈な重量用ツールを準備する必要がありますが、その価値はあります。

リペアビリティの利点: iMacの電源装置が壊れたとしても、簡単に交換できます。そして旧モデル同様に、iMac内部に大きなコンデンサが搭載されていないため、内部へのアクセスが安全です。

一方で、コンデンサの交換はできません。破壊無しに内部を開くことはできません。

ネットワークケーブルが通っているとはいえ、内部は標準のApple MacBook用電源アダプタと似ています。

小さなイーサーネットボードが黒いワイヤー束を介して、インターネットを通信しているようです。

赤いワイヤーは、非Magsafeの磁気アンビリカルコードに電力を供給します。

電源の出力は143Wですが、私たちのテスト結果によると、iMacは最大でも60W程度しか消費しませんでした。これは電力を必要とするUSB-C周辺機器用に、十分な余裕を持たせています。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.