Salta al contenuto principale
Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Use a T8 Torx driver to remove the two remaining 5.0 mm screws securing the display, one from each hinge. Once these screws are removed, the display will no longer be connected to the upper case. Hold both halves steady.
  • Use a T8 Torx driver to remove the two remaining 5.0 mm screws securing the display, one from each hinge.

  • Once these screws are removed, the display will no longer be connected to the upper case. Hold both halves steady.

Utiliza un destornillador Torx T8 para retirar los dos tornillos restantes de 5.0 mm que sujetan la pantalla, uno de cada bisagra.

Una vez retirados estos tornillos, la pantalla dejará de estar conectada a la carcasa superior. Mantén ambas mitades firmes.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.