Salta al contenuto principale

Sostituzione cover posteriore Samsung Galaxy Note20

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 12le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 1 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 2 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 3 di 3
Cut along the perimeter of the rear cover
  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Ripeti la procedura di riscaldamento e taglio dell'adesivo per gli altri tre lati della cover posteriore rimasti.

Puoi inserire un nuovo plettro nelle fessure create dai plettri lasciati in ogni angolo.

Mentre procedi, lascia un plettro in ogni angolo per evitare che l'adesivo si reincolli.

Se la cover posteriore è ancora attaccata al telaio dopo aver tagliato lungo tutti e quattro i lati, prova a far passare di nuovo un plettro attraverso l'adesivo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.