三星 Galaxy Note20 后盖更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Cinese

Traduzione in corso passo 4

Passo 4

Cut along the perimeter of the rear cover

Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.
You can insert each new opening pick in the gaps created by the opening picks left in each corner.
As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.
If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

沿后盖的周边切开

重复加热和沿着后盖的剩余三个侧面切割胶粘剂的过程。
你可以将每个新的三角撬片插入到每个角处的三角撬片所创建的间隙中。
在继续操作时，请在每个角上留一个三角撬片，以防止胶粘剂重新密封。
如果在切割完所有四个侧面后后盖仍固定在框架上，请尝试用一个三角撬片再次切开粘合剂。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.