Aggiusta le tue cose Community Store

Samsung Galaxy Note20 Vervanging van de achterste behuizing

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Olandese
Passo precedente Passo successivo

Traduzione in corso passo 4

Passo 4
Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 1 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 2 di 3 Samsung Galaxy Note20 Rear Cover Replacement, Cut along the perimeter of the rear cover: passo 0, immagine 3 di 3
Cut along the perimeter of the rear cover

  • Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover.

  • You can insert each new opening pick in the gaps created by the opening picks left in each corner.

  • As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing.

  • If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick.

Snijd de lijm langs de gehele buitenkant van de achterste behuizing door

Herhaal het verwarmen en doorsnijden van de lijm aan alle kanten van de achterste behuizing.

Gebruik voor iedere kant een andere plectrum. Je kunt je nieuwe plectrum telkens in de opening steken die door de in de hoek achtergebleven plectrum open wordt gehouden.

Laat je openingsplectrum in elke hoek zitten om te voorkomen dat de lijm zich opnieuw aan de telefoon gaat hechten.

Als de achterste behuizing na het doorsnijden van de lijm aan alle vier de kanten nog steeds aan het frame van de telefoon blijft zitten, gebruik je je plectrum om deze stap te herhalen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.