三星 Galaxy Note20 后盖更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Cinese

Traduzione in corso passo 2

Passo 2

Insert an opening pick

Apply a suction cup to the heated edge of the rear cover, as close to the edge as possible.
Pull up on the suction cup with strong, steady force to create a gap between the rear cover and the frame.
Depending on the age of your phone, this may be difficult. If you are having trouble, apply more heat to the edge and try again.
Insert an opening pick into the gap.
Don't insert the opening pick more than 5 mm into the phone or you risk damaging the internal components.

插入一个三角撬片

在后盖的加热边缘上施加一个吸盘，并尽可能靠近边缘。
用强大的稳定力向上拉动吸盘，以在后盖和框架之间形成一个间隙。
根据你手机的年龄，这可能很困难。如果遇到问题，请对边缘加热更多，然后重试。
在间隙中插入一个三角撬片。
请勿将三角撬片插入手机内5毫米以上，否则可能会损坏内部组件。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.