Aggiusta le tue cose Community Store

Changement carte Wi-Fi Xbox Series X

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente

Traduzione in corso passo 2

Passo 2
Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 1 di 3 Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 2 di 3 Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 3 di 3

  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it's completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Saisissez la carte Wi-Fi et retirez-la à l'horizontale du châssis principal.

Ne tirez pas la carte vers le haut avant qu'elle ne soit complètement déconnectée.

Retirez la carte Wi-Fi.

Lors du remontage, alignez le connecteur de la carte Wi-Fi avec le raccord du châssis principal et appuyez pour la reconnecter.

[* black] Grip the antenna board and pull it directly away from the center chassis to disconnect it.
- [* icon_caution] Don't pull the antenna board ***up*** until it is completely disconnected.
+ [* icon_caution] Don't pull the antenna board ***up*** until it's completely disconnected.
[* black] Remove the antenna board.
[* icon_reminder] During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.