Aggiusta le tue cose Community Store

Xbox Series X WLAN-Platine ersetzen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo precedente

Traduzione in corso passo 2

Passo 2
Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 1 di 3 Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 2 di 3 Xbox Series X Wi-Fi Antenna Board Replacement: passo 0, immagine 3 di 3

  • Grip the antenna board and pull it directly away from the center chassis to disconnect it.

  • Don't pull the antenna board up until it's completely disconnected.

  • Remove the antenna board.

  • During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

Greife die WLAN-Platine und ziehe gerade aus dem Chassis, um sie zu lösen.

Ziehe die WLAN-Platine nicht nach oben, solange sie nicht komplett getrennt ist.

Entferne die WLAN-Platine.

Richte den Anschluss der Platine beim Zusammenbau mit den Anschlüssen am Chassis aus und drücke die Platine an ihren Ort.

[* black] Grip the antenna board and pull it directly away from the center chassis to disconnect it.
- [* icon_caution] Don't pull the antenna board ***up*** until it is completely disconnected.
+ [* icon_caution] Don't pull the antenna board ***up*** until it's completely disconnected.
[* black] Remove the antenna board.
[* icon_reminder] During reassembly, align the board's connector with the port on the center chassis and press to reconnect.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.