Aggiusta le tue cose Community Store

Xbox Series X 后面板更换

Inglese
Cinese

Informazioni Guida

= Fatto = Incompleto
    '''Prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.'''
    Use this guide to remove or replace the back panel on an Xbox Series X.
    Use this guide to remove the back panel on an Xbox Series X.
    Before you begin, completely ***power down and unplug all cables*** from your console. Remember to follow general [link|https://www.ifixit.com/News/63909/what-is-esd|electrostatic discharge (ESD)|new_window=true] safety procedures while repairing your console.
      ***To reassemble your device, follow these instructions in reverse order.***

      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Xbox%20Series%20X|Xbox Series X Answers community] for help.

      Passi guida

      Passo 1 — 揭开后面板螺丝

      在开始本指南之前，请关闭控制台并拔下所有电缆。

      Passo 2

      用一把钝镊子撕掉后面板上的大贴纸，露出第二个螺丝。

      Passo 3 — 卸下后面板螺丝

      使用 T8 Torx 螺丝刀卸下固定后面板的两颗 7.4 毫米螺丝。

      Passo 4 — 解开后面板

      将撬棒的平端插入后面板和外壳之间的间隙中，靠近底座左侧。

      Passo 5

      将撬棒的平端插入后面板和外壳之间的间隙中，靠近底座右侧。

      Passo 6 — 卸下后面板

      抓住刚刚创建的开口处的后面板并将其拉离外壳以松开长边。

      Passo 7

      后面板插入外壳顶部的间隙中。

      I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.