Aggiusta le tue cose Community Store

Xbox Series X Vervanging van het achterste paneel

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Olandese
Passo precedente Passo successivo

Traduzione in corso passo 3

Passo 3
Xbox Series X Back Panel Replacement, Remove the back panel screws: passo 0, immagine 1 di 1
Remove the back panel screws

  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

Verwijder de schroeven uit het achterste paneel

Gebruik een T8 Torx-schroevendraaier om de twee 7.4 mm lange schroeven, die het achterste paneel bevestigen, te verwijderen.

Zorg dat je, tijdens deze reparatie, goed bijhoudt welke schroeven waar vandaan komen zodat je zeker weet dat ze op de juiste plek worden terug geplaatst. Zo voorkom je schade aan je toestel.

[title] Remove the back panel screws
-[* red] Use a T8 Torx driver to remove the two 7.4 mm screws securing the back panel.
+[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.