Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 11

Passo 11
Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires. Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.
  • Start routing the SATA cable that you have already attached to the logic board up through the corner of the optical bay, following the existing wires.

  • Make sure you have the cable all the way tucked in behind the connector before proceeding. See the first graphic as an example.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.