Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 2

Passo 2
Apply a suction cup to the screen, as close to the heated edge as possible. If your screen is badly cracked, follow this guide  to tape over the cracked screen. If all else fails, you can superglue the suction cup to the broken screen. Pull up on the suction cup with strong, steady force to create a gap.
Insert an opening pick
  • Apply a suction cup to the screen, as close to the heated edge as possible.

  • If your screen is badly cracked, follow this guide to tape over the cracked screen. If all else fails, you can superglue the suction cup to the broken screen.

  • Pull up on the suction cup with strong, steady force to create a gap.

  • Depending on the age of your device, this may be difficult. If you have trouble, apply more heat and try again.

  • Insert the opening pick into the gap.

温めた下部端に近い位置に、吸盤カップをしっかりと装着します。

バックガラスにひどい亀裂が入っている場合は、 このガイド を参照して、ひび割れたスクリーン上をテープでカバーしてください。これら全てがうまくいかない場合は、壊れたパネル上に、瞬間接着剤などの強力ボンドを吸盤に付けて装着してください。

一定の強い力で吸盤カップを引き上げて、バックパネルとフレームの間に隙間を作ります。

デバイスの使用年数にもよりますが、これは難しい作業です。うまく進まない場合は、端を再度温めてください。

開口ピックの先端を隙間に差し込みます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.