Aggiusta le tue cose Community Store

iPad 4 CDMA Verbinder des Logic Board Austausch

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
iPad 4 CDMA Logic Board Connectors Replacement: passo 0, immagine 1 di 1

  • Disconnect the following connectors from their respective sockets on the logic board:

  • Wi-Fi antenna cable

  • Speaker connector cable.

  • Dock/Lightning connector cable.

  • There may be a piece of black tape covering this connector. Remove it with tweezers.

  • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

Löse folgende Verbinder aus ihren jeweiligen Sockeln auf dem Logic Board:

WiFi Antennenkabel

Lautsprecherkabel

Dock/Lightninganschlusskabel

Möglicherweise ist dieser Verbinder mit einem schwarzen Band bedeckt. Entferne es mit einer Pinzette.

Achte darauf, nur am Verbinder zu hebeln, nicht am Sockel selbst. Dies könnte sonst schlimme Schäden verursachen.

[* black] Disconnect the following connectors from their respective sockets on the logic board:
[* red] Wi-Fi antenna cable
[* orange] Speaker connector cable.
[* yellow] Dock/Lightning connector cable.
- [* icon_note] There may be a piece of black tape covering this connector. Remove it with tweezers.
+ [* icon_note] There may be a piece of black tape covering this connector. Remove it with [product|IF145-020|tweezers].
[* icon_caution] Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.