Traduzione in corso passo 6
Passo 6
Putting the panel on, putting on the bottom case
-
I put the panel back on for my computer. I'd imagine its optional but I did it just to be safe
-
The panel is put on by putting the panel in the ridge between the outside tabs(the ones used to release it) and the inside tabs (closest to the memory slot)
-
The panel is secured by pushing the outside tabs onto the panel (Picture 2)
-
To put on the bottom case, line it up using the hinge and the cutout for the hinge, then make sure the screws line up
-
Screw down the Phillips till they're tight be careful not to strip them.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.