Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 10

Passo 10
Slide the pick all along the right edge of the phone to separate the back cover's adhesive. Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing. As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.
  • Slide the pick all along the right edge of the phone to separate the back cover's adhesive.

  • Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing.

  • As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.

Schuif je plectrum langs de rechterzijde van de telefoon omhoog om de lijm onderweg door te snijden.

Laat je plectrum onder de rechterkant van het glas zitten, in de buurt van de bovenkant van de telefoon, om te voorkomen dat de lijm zich opnieuw gaat hechten.

Tijdens deze handeling kan het voorkomen dat een van de andere plectrums uit de telefoon valt. Als dit gebeurt, kun je je plectrum(s) aan de kant leggen aangezien de onderkant als het goed is niet meer vast komt te zitten.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.