Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 10

Passo 10
Slide the pick all along the right edge of the phone to separate the back cover's adhesive. Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing. As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.
  • Slide the pick all along the right edge of the phone to separate the back cover's adhesive.

  • Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing.

  • As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.

Faites glisser le médiator sous le bord droit du téléphone pour décoller la coque.

Laissez votre outil en haut du bord droit de la vitre pour éviter que la colle adhère de nouveau.

Il est possible qu'à ce moment, un ou deux des autres médiators tombent de la coque . Si c'est le cas, mettez-le ou les de côté, car il est peu probable que le bord inférieur colle de nouveau.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.