Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 10

Passo 10
Slide the pick all along the right edge of the phone to separate the back cover's adhesive. Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing. As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.
  • Slide the pick all along the right edge of the phone to separate the back cover's adhesive.

  • Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing.

  • As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.

Desliza la púa a lo largo del borde derecho del teléfono para separar el adhesivo de la tapa trasera.

Deja la púa bajo el borde derecho del cristal, cerca de la parte superior del aparato, para evitar que el adhesivo se vuelva a sellar.

Al hacer esto, la tapa trasera puede liberar una o ambas púas y dejarlas caer libremente. Si esto ocurre, deja la(s) púa(s) a un lado ya que el borde inferior no debería volver a sellarse a partir de este punto.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.