Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 10

Passo 10
Slide the pick all along the right edge of the phone to separate the back cover's adhesive. Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing. As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.
  • Slide the pick all along the right edge of the phone to separate the back cover's adhesive.

  • Leave your pick under the right edge of the glass near the top of the device to prevent the adhesive from resealing.

  • As you do this, the back cover may release one or both of the other picks and allow them to fall free. If this occurs, set the pick(s) aside as the bottom edge shouldn't reseal from this point onward.

Schiebe das Plektrum an der rechten Kante entlang, um den Kleber der Rückabdeckung aufzutrennen.

Lasse das Plektrum unter der rechten Kante des Glases oben am Gerät stecken, damit sich der Kleber nicht wieder verbindet.

Bei diesem Vorgang kann eines oder mehr der Plektren herausfallen. In diesem Fall kannst du das Plektrum/die Plektren zur Seite legen, da die Unterkante nicht mehr festkleben sollte.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.