Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 9

Passo 9
Apply a suction cup to the back of the phone, as close to the center of the right edge as possible. Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame. Insert the point of an opening pick into the gap.
Separate the right edge adhesive
  • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.

在手机的背面,尽可能靠近右边缘的中心处应用吸盘。

用强大的稳定力拉动吸盘,以在后盖和框架之间形成一个间隙。

将三角撬片的尖端插入间隙中。

与前一条边缘一样,你需要向下倾斜三角撬片以将其完全插入后盖下方。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.