Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 9

Passo 9
Apply a suction cup to the back of the phone, as close to the center of the right edge as possible. Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame. Insert the point of an opening pick into the gap.
Separate the right edge adhesive
  • Apply a suction cup to the back of the phone, as close to the center of the right edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • Like with the previous edge, you will need to tilt the opening pick downward to fully insert it underneath the back cover.

Posez une ventouse sur la coque arrière, aussi près que possible du milieu du bord droit que possible.

Tirez fortement et constamment sur la ventouse pour ouvrir un espace entre la coque arrière et le châssis.

Insérez la pointe d'un médiator dans l'espace.

Comme pour le côté gauche, vous devrez faire pivoter le médiator vers le bas pour l'introduire complètement sous la coque arrière.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.