Aggiusta le tue cose Community Store

バックカバーの取り外し

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
Back Cover Removal: passo 0, immagine 1 di 3 Back Cover Removal: passo 0, immagine 2 di 3 Back Cover Removal: passo 0, immagine 3 di 3

  • Be careful near the corner, as the glass is very weak. Apply more heat at any time if the adhesive becomes stuck.

  • Leave an opening pick in the upper-right corner.

  • Use another opening pick to cut the adhesive around the bottom-right corner.

  • Leave that opening pick in the phone.

右上隅にオープニングピックを残しておきます。

別のオープニングピックを使って、右下隅の周囲の接着剤をカットします。

このオープニングピックを携帯電話に残します。

iOpener、ヘアドライヤー、またはヒートガンを使用して、接着剤を切断している場所に必要に応じてさらに熱を加えます。

+[* icon_caution] Be careful near the corner, as the glass is very weak. Apply more heat at any time if the adhesive becomes stuck.
[* black] Leave an opening pick in the upper-right corner.
[* black] Use another opening pick to cut the adhesive around the bottom-right corner.
[* black] Leave that opening pick in the phone.
-[* icon_note] Use an iOpener, hair dryer, or heat gun to apply more heat as needed where you are cutting the adhesive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.