Aggiusta le tue cose Community Store

Retrait de la coque arrière

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
Back Cover Removal: passo 0, immagine 1 di 3 Back Cover Removal: passo 0, immagine 2 di 3 Back Cover Removal: passo 0, immagine 3 di 3

  • Be careful near the corner, as the glass is very weak. Apply more heat at any time if the adhesive becomes stuck.

  • Leave an opening pick in the upper-right corner.

  • Use another opening pick to cut the adhesive around the bottom-right corner.

  • Leave that opening pick in the phone.

Laissez le médiator dans le coin supérieur droit.

Prenez un autre médiator pour couper l'adhésif le long du coin inférieur droit.

Laissez votre outil dans le téléphone.

Refaites chauffer avec un iOpener, un sèche-cheveux ou un pistolet à air chaud si nécessaire au cours de la procédure de découpe de l'adhésif.

+[* icon_caution] Be careful near the corner, as the glass is very weak. Apply more heat at any time if the adhesive becomes stuck.
[* black] Leave an opening pick in the upper-right corner.
[* black] Use another opening pick to cut the adhesive around the bottom-right corner.
[* black] Leave that opening pick in the phone.
-[* icon_note] Use an iOpener, hair dryer, or heat gun to apply more heat as needed where you are cutting the adhesive.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.