Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
If you removed the camera module's internal components without its plastic casing, apply a few drops of high concentration (over 90%) isopropyl alcohol around the edges of the casing to soften the adhesive securing it into place. Allow the alcohol 1-2 minutes to penetrate the adhesive. Use a pair of tweezers to remove the plastic camera casing.
Remove the camera module casing
  • If you removed the camera module's internal components without its plastic casing, apply a few drops of high concentration (over 90%) isopropyl alcohol around the edges of the casing to soften the adhesive securing it into place.

  • Allow the alcohol 1-2 minutes to penetrate the adhesive.

  • Use a pair of tweezers to remove the plastic camera casing.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.