Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Use a spudger to pry up and disconnect the front-facing camera flex cable from the motherboard. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
Disconnect the front-facing camera
  • Use a spudger to pry up and disconnect the front-facing camera flex cable from the motherboard.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.