Aggiusta le tue cose Community Store

Samsung Galaxy S20 Plus バックカバーの取り外し

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Giapponese
Passo precedente Passo successivo

Traduzione in corso passo 5

Passo 5
Samsung Galaxy S20 Plus Back Cover Removal, Separate the left edge adhesive: passo 0, immagine 1 di 3 Samsung Galaxy S20 Plus Back Cover Removal, Separate the left edge adhesive: passo 0, immagine 2 di 3 Samsung Galaxy S20 Plus Back Cover Removal, Separate the left edge adhesive: passo 0, immagine 3 di 3
Separate the left edge adhesive

  • Apply a suction cup to the back of the phone, as close to the center of the left edge as possible.

  • Pull on the suction cup with strong, steady force to create a gap between the back cover and the frame.

  • Insert the point of an opening pick into the gap.

  • As the glass on this edge is curved, you won't be able to insert this pick very far. As long as the very tip of the pick is underneath the glass's edge, you will be able to proceed.

  • Due to tight tolerances, this may take multiple attempts.

  • If you are having trouble creating a gap, apply more heat to the edge and try again.

  • You can try also applying a few drops of high concentration (over 90%) isopropyl alcohol into the seam to help loosen the adhesive.

  • Do not apply excessive force with the pick, or you risk cracking the back cover glass.

左端接着剤を剥がします

吸盤カップをデバイス背面に装着します。できる限り左端の中央に取り付けてください。

強く、一定の力で吸盤カップを引き上げて、バックカバーとフレームの間に隙間を生じます。

開口ピックの先端を隙間に差し込みます。

このエッジのガラスは湾曲しているため、開口ピックの先端を深くまで差し込むことができません。ピックの先端がガラスエッジの下にある限り、作業を続けることができます。

接着剤の強度のため、この作業は複数回に渡って行う必要があります。

隙間ができない場合は、さらにiOpenerを温めてさらに同じ部分に当ててください。

もしくは高濃度(90％以上)イソプロピルアルコールの数滴を隙間に注入し、接着剤を緩めることもできます。

開口ピックで過剰な力を加えないでください。バックカバーのガラスがひび割れてしまうリスクがあります。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.