Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 12

Passo 12
Continue swinging open the back panel until you can rest it on the left edge the phone, being careful not to put any stress on the attached ribbon cable. During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.
  • Continue swinging open the back panel until you can rest it on the left edge the phone, being careful not to put any stress on the attached ribbon cable.

  • During reassembly, this is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working.

付属のリボンケーブルにストレスを加えないように注意しながら、バックパネルをデバイス左端に載せれるまで開きます。

再組み立て中、デバイスの電源を入れ、密閉する前にすべての機能をテストしてください。点検後、作業を再開する前に、デバイスの電源を切ってください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.