Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 3

Passo 3
Use the tool like a pizza cutter—roll it along the gap, cutting the foam adhesive in between the frame and display. Be sure to always push with the cutting wheel forward. If you pull, the wheel might get pulled out of the handle. Run the tool up along the left side of the display.
Slice through the display adhesive
  • Use the tool like a pizza cutter—roll it along the gap, cutting the foam adhesive in between the frame and display.

  • Be sure to always push with the cutting wheel forward. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

Gebruik je tool als een pizzasnijder—rol deze langs de opening en snijd onderweg de schuimen lijm tussen het frame en het scherm door.

Zorg dat je je rollende mes altijd naar voren duwt. Als je trekt, kun je het wiel uit het handvat trekken.

Rol je tool langs de gehele linkerkant van het scherm.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.